Ready CDL PrepReady CDL Prep
Get the app
Alabama · ALChange state

Free Alabama CDL practice test 2026

The tests that apply in Alabama, drawn from the shared bank plus the questions written specifically for the Alabama manual.

Tests that apply in Alabama

General KnowledgeRequired for every CDL applicant, whatever class or endorsement you are after.
See the test
Air BrakesThe section applicants fail most often. Pressure figures differ by state manual.
See the test
Combination VehiclesNeeded for Class A tractor-trailer, including coupling and uncoupling order.
See the test
Pre-Trip InspectionWhat the examiner expects you to point at and say out loud, in order.
See the test
Hazardous MaterialsH endorsement: placarding, shipping papers and the segregation table.
See the test
Doubles & TriplesT endorsement: coupling order, converter dollies and trailer sway.
See the test
Tank VehiclesN endorsement: surge, baffles and the rules for outage.
See the test
Passenger TransportP endorsement: loading, standee lines and emergency exits.
See the test
School BusS endorsement: danger zones, loading and unloading, railroad crossings.
See the test

A sample question

One example, answer shown. Practising the rest happens in the app.

At approximately what pressure does the air compressor governor stop pumping air into the tanks?

  1. 125 psi
  2. 150 psi
  3. 100 psi
  4. 60 psi

The governor 'cut-out' pressure is about 125 psi. When tank pressure falls to roughly 100 psi, the governor cuts back in and the compressor resumes pumping.

Handbook section 5.1.2
Get the app